37
Setting the frequency of the audible signal
The buzzer has 3 different tones and can be changed by pressing the
button, but only when the time of day is displayed.
Automatic oven cooking
To cook food automatically in the oven, it is necessary to:
1. Set the length of the cooking period.
2. Set the end of the cooking time.
3. Set the temperature and the oven cooking program.
These operations are done in the following way:
1. Set the length of the cooking period by pushing the button and
the button to increase, or to decrease if you have passed the
desired time (fig. 5.5). The AUTO and the symbol will illuminate.
2. Set the end of the cooking time by pressing the button (the
cooking time already added to the clock time will appear) , and the
button (fig. 5.6); if you pass the desired time you may get back
by pushing the button. After this setting, the symbol will
disappear. If after this setting, the AUTO flashes on the display and a
buzzer sounds, it means there was an error in the programming, that
is that the cooking cycle has been superimposed on the clock. In this
case, modify the end of cooking time or the cooking period itself by
following the above mentioned instructions again.
3. Set the temperature and the cooking program by using the switch
and thermostat knobs of the oven (see specific chapters).
Now the oven is programmed and everything will work automatically,
that is: the oven will turn on at the right moment to end the cooking
at the established hour. During cooking, the symbol remains
EN
Bor
etti Milano / User guide - Installation advice
Summary of Contents for MFBI 901 AN
Page 1: ...MFBI 901 AN MFBI 901 IX MFBI 901 ZW EN USER GUIDE INSTALLATION ADVICE www boretti com ...
Page 3: ...3 EN Boretti Milano User guide Installation advice ...
Page 63: ...63 EN Boretti Milano User guide Installation advice ...
Page 64: ...Abberdaan 114 1046 AA Amsterdam The Netherlands www boretti com 1105560 EN ß0 ...