20
Note
If removing the pan from the cooking zone before the programme
has been completed, the “Fast heating” function will be completed
with the remaining time if the pan is put back on the cooking zone
within 10 minutes.
“Booster” function
Turn the control knob clockwise to set the maximum power level (9), then
turn clockwise again to the “P” setting and release the knob (after the
“beep”); the control knob returns to the maximum setting (9) automatically
and the relative symbol lights up on the cooking zone display. The
“Booster” program is now operative. This function allows the cooking
zone to operate at the Booster maximum power (above the nominal
power) for a maximum 5 minutes; it could be used, for example, to rapidly
heat up large amount of water. This function is available on the front left/
rear right zones. To disable this function turn the knob anti-clockwise to
a lower power level or to the “0” (Off). The “Booster” is also disabled by
turning the knob again to the “P” setting; in this case the cooking zone
operates at the power level 9. Note: if a cooking zone is still hot, it is
not possible to use the “Booster” function and will flash if you try to
activate. The cooking zone is automatically set to the maximum power
level (9). The “Booster” function is always limited to a maximum of 5
minutes. You can activate the “Booster” function again after 5 minutes.
Important notes
The “Booster” function is not suitable for use with non water
based cooking. Do not use this function for heating oil (e.g.
deep fat frying)
EN
Bor
etti Milano / User guide - Installation advice
Summary of Contents for MFBI 901 AN
Page 1: ...MFBI 901 AN MFBI 901 IX MFBI 901 ZW EN USER GUIDE INSTALLATION ADVICE www boretti com ...
Page 3: ...3 EN Boretti Milano User guide Installation advice ...
Page 63: ...63 EN Boretti Milano User guide Installation advice ...
Page 64: ...Abberdaan 114 1046 AA Amsterdam The Netherlands www boretti com 1105560 EN ß0 ...