manualshive.com logo in svg

BORETTI MFBI 901 AN, User'S Manual & Installation Instructions

Share
Download
BORETTI MFBI 901 AN User'S Manual & Installation Instructions Download Page 30

30

Recommended for:

For grill cooking when a fast outside browning is necessary to keep 
the juices in, i. e. veal steak, steak, hamburger, etc.

 CONVECTION COOKING WITH VENTILATION

The upper and lower heating elements and the fan turn on.
The heat coming from the top and bottom is diffused by forced 
convection. The temperature must be regulated between 50°C and 
250°C with the thermostat knob.

Recommended for:

For foods of large volume and quantity which require the same 
internal and external degree of cooking; for ie: rolled roasts, turkey, 
cakes, etc.

 HOT AIR COOKING

The circular element and the fan are on. The heat is diffused by forced 
convection and the temperature must be regulated between 50°C and 
250°C with the thermostat knob. It is not necessary to preheat the 
oven. 

Recommended for:

For foods that must be well done on the outside and tender or rare on 
the inside, i. e. lasagna, lamb, roast beef, whole fish, etc.

 DEFROSTING FROZEN FOODS

Only the oven fan is on. To be used with the thermostat knob on “   ” 
because the other positions have no effect. The defrosting is done by 
simple ventilation without heat.

Recommended for:

To rapidly defrost frozen foods; 1 kilogram requires about one hour.
The defrosting times vary according to the quantity and type of foods 
to be defrosted.

EN

Bor

etti Milano / User guide - Installation advice

Summary of Contents for MFBI 901 AN

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands