BORETTI MFBI 901 AN, User'S Manual & Installation Instructions

Page: 52 / 64

52
After cleaning, replace the inner glass pane
When replacing the inner glass pane, make sure that:
* You replace the pane correctly, as shown. The pane must be in the
position described below in order to fit into the door and to ensure that
the appliance operates safely and correctly.
* You take extra care not to bump the edges of the glass against any
object or surface.
* You do not force the pane into place. If you are experiencing difficulties
replacing the pane, remove it and start the process again from the
beginning. If this still does not help, call Customer Care.
* Check that you are holding the pane the correct way. You should be
able to read the wording on it as it faces you.
* Check that the gasket “A” is in place (fig. 6.18). If not, correctly place the
gasket in the top edge of the inner glass (in the centre).
1. Insert the inner glass pane in the uppermost pair of grooves and
push it slightly (arrow 1 in figure 6.18).
2. Gently lower into place (arrow 2 in figure 6.18).
EN
Bor
etti Milano / User guide - Installation advice