MT-4322/4323/4324
MULTICOOKER USER MANUAL
IMPORTANT SAFEGUARDS
This User Manual contains information on the use and care of this product. Please read User Manual carefully before using the
appliance and save it for future reference.
Before first use, check the appliance specifications and the power supply in your network.
Use only for domestic purposes according to the User Manual. It is not intended for industrial use.
For indoor use only.
Do not use with damaged cord, plug or other injuries.
Keep the power cord away from sharp edges and hot surfaces.
Do not pull the cord. Always take the plug. Don’t reel the cord around the appliance body.
Never attempt to dissemble and repair the appliance by yourself. If you encounter problems, please contact customer service
center.
Using accessories or replacement parts which are not recommended or sold by the manufacturer may cause damage to the
appliance.
Always unplug the appliance and let it cool down before cleaning and removing parts. Keep unplugged when not in use.
To avoid electric shock and fire, do not immerse the appliance in water or other liquids. If that occurs, immediately unplug the
appliance and contact service center for inspection.
The appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or
with lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Place the multicooker on a stable, horizontal and level surface. Position it far from flammable materials including curtains,
walls, and fabric upholstered furniture.
Do not place the multicooker near heat-emitting devices such as heaters, cooktops or electric burners.
Make sure that there is enough space around. The multicooker should stand more than 15 cm far from such flammable
objects as furniture, curtains etc.
Don’t use the appliance near explosive objects.
Don’t move the appliance containing hot food or liquids or when it is connected to electricity network.
Don’t leave water or products in the multicooker for a long time.
Don’t cover the steam valve and the lid while the multicooker is operating. It may cause malfunction in multicooker work.
Don’t let the multicooker work with empty pot.
While you are cooking the multicooker lid and outer surface might becomet hot. Handle or move the multicooker carefully.
When you open the multicooker lid, wait while steam goes out and then you could get closer.
While cooking avoid using sharp utensils not to damage the pot inner surface. Please use the spoon which comes with the
multicooker. You may use also wooden, plastic or silicone utensils.
Beware of hot steam that comes out of the steam vent while cooking. Keep hands and face away from the
multicooker when you open it to avoid being burnt by hot steam.
Pour water only into the inner pot. Don’t pour water into the multicooker body.
Always check if there are no foreign objects between the pot bottom and heating plate. Foreign objects may cause smell of
burning, strange sounds and cause the multicooker malfunction.
If any unusual sounds or any other disruption happens, switch the multicooker off. Make sure if there are no any object or
liquid between the pot and heating plate. If malfunction reason isn’t found, please call customer service. Never attempt to
dissemble and repair the multicooker by yourself.
Let the multicooker pot cool before washing to avoid pot inner coating damage.
Let the multicooker pot cool before washing to avoid pot inner coating damage.
BEFORE FIRST USE
Please unpack your appliance. Remove all packing materials. Remove all stickers from the lid and housing.
Please check if all parts of the multicooker are in a set. Please check that every part is not damaged.
Wash all removable parts in warm soapy water. Rinse and dry all parts thoroughly. Wipe the stainless steel outer housing
with a clean damp cloth.
NEVER immerse the outer housing in water or any other liquid.
Before first use pour water into the multicooker pot. Water should be about 70% of the pot volume. Than start program
“Steam/Boil”
for 60 minutes.
COOKING WITH THE MULTICOOKER
Make sure that the multicooker is clean inside and outside. Check if there are foreign objects inside or between the pot and
heating plate.
Place the inner pot into the multicooker.
Rotate the pot a bit. Make sure that the pot has intimate contact with the heating plate.
Put ingredients into the pot.
Close the lid.
Connect power cord socket into the multicooker socket.
Plug the multicooker in. Don’t plug in if you haven’t fulfilled all the requirements.
CHOOSING THE PROGRAM
Press for some time the Start button to turn on the cooker. Press the Menu button to choose the program. The indication of certain
program will light, when you get to the program you want. After you get to the certain program you see the time of the program
displayed. If you don’t want to change default time, press the Start button. Than the program and countdown will start. In the
«Fry»
program the countdown starts after the program reaches certain temperature. Before countdown in that program starts you see the
dynamic symbol displayed. After cooking program is finished you hear the sound signal and the cooker automatically will be in the
Keep warm mode. The
«Fry»
and
«Yogurt»
programs don’t have keep warm mode.
Press the button Warm/Cancel for 5 seconds
to turn off the cooker.
Adjusting parameters before starting the program.
Choose the program by pressing Menu button. If you need
«Multicook»
program
,
press
the Multicook button.
Than you’ll see the default time parameters (for
«Multicook»
this is 10 minutes and 30°С temperature). Press the Time button. The
time indication will blink. Set up desired time from 0 to 59 by pressing
and
buttons. Press the Time button again and
you’ll see the hours indication. Set up required hours from 0 to 24 hours by pressing
and
buttons. The range of setting
up is 1 hour and 1 minute. If you keep pressing on the button
or
, the range will be changed to 5 minutes and 5 hours.
To change the temperature press the Time button. Than you’ll see the default temperature displayed. Set up required temperature
from 30 to 180°C (the range of setting is 1°C) by pressing
and
buttons. If you press
and
buttons for a
longer time the range of setting will be 5°C.
