2
Changing of parameters in the process of cooking
If you want to change time and temperature in the process of cooking, press the Time or Temperature button. Set up required
parameters as described above in Adjusting parameters section. After you have set up required parameters press the Start button
and continue cooking with the new setting.
AUTO KEEP WARM
All the programs except of
«Yogurt»
and
«Fry»
programs
have
«Auto keep warm»
function. This function activates after the
cooking program is finished. If the certain program is followed by keep warm function, the indication will light at Warm/Cancel button.
If there is no such light indication, the coking program will not be followed by keep warm function. You can always deactivate or
activate Keep warm function by pressing the Warm/Cancel button. This function is also available in the Delayed start mode.
Please note
:
Auto keep warm function can last for 24 hours. It is not recommended to leave the food under such temperature
conditions for a long time because it may cause food spoiling.
Warning:
If the coking temperature exciding maximum, the appliance will automatically switch to auto keep warm function.
WARM UP
If you nee to warm up food, turn on the cooker by pressing the Start button and press Warm/Cancel button (without choosing a
program). Than the indication will light at the Warm/Cancel button. The appliance will be in warm up food mode. This mode
temperature is 70°C.
DELAYED START
«Delayed start»
function allows to delay program start from 30 minutes to 24 hours. To use this function choose required program
by Menu button. Than press for 3 seconds the Time button. The minutes indication will blink. Set up required parameters by pressing
and
buttons. The range of setting is 5 minutes. Press the Time button again. The hours indication will start blink. Set up
required parameters by pressing
and
buttons. The range of setting is 1 hour. The delayed time does not include the
time the time for cooking. After set up required delayed time press the Start button. The
«Delay»
function is not available for
«Fry»
and
«Pilaf».
Warning:
It is not recommended to leave food under the Delayed mode for more than 12 hours. Some food might be spoiled at
room temperature.
CANCELLING
Cancel the program or escape from menu by pressing the Warm/Cancel button.
ACCESSORIES
With the multicookers also supplied: pot (inside of appliance), power cable, condensate container (attached to the appliance),
measuring cup, spoon and steam container.
CLEANING AND MAINTAINANSE
Always unplug the appliance before cleaning.
Let the appliance cool down completely.
Wash the pot using detergent, rinse with water and dry with soft material.
Do not use dishwasher for inner pot washing.
Do not use chemical and abrasive cleaners for washing the appliance and accessories.
Do not put the pot into cold water right after cooking. Let the pot cool down. Do not place very cold products on hot surface.
CAUTION: do not let water get inside the appliance.
Clean the appliance housing if required with warm water and soft material, do not use any chemical and abrasive cleaners or
dish washing detergent.
Clean the steam valve after cooking. Detach it carefully. Rinse with running
water, dry and set back.
SPECIFICATION
Model
Power supply
Power Volume
Net weight / Gross weight
MT-4322 220-240 V, 50 Hz
860 W
5,0 L
2,5 kg / 2,95 kg
Warranty does not apply to consumables (as ceramic and non stick coating, rubber sealing and etc.)
Production date is available in the serial number located on the identification sticker on the gift box and/or on sticker on the device.
The serial number consists of 13 characters, the 4th and 5th characters indicate the month, the 6th and 7th indicate the year of
device production.
Producer may change the complete set, appearance, country of manufacture, warranty and technical characteristics of the model
without any notice. Please check when purchasing device.
Production branch:
COSMOS FAR VIEW INTERNATIONAL LIMITED-ROOM 701, 16 APT, LANE 165, RAINBOW NORTH STREET, NINGBO, CHINA
