BORETTI MFBI 901 AN, User'S Manual & Installation Instructions

Page: 59 / 64

59
Anti-tilt bracket
Warning
This appliance must be restrained to prevent accidental
tipping by fitting a bracket to the rear of the appliance and
securely fixing it to the wall.
To fit the anti-tilt bracket:
1. After you have located where the cooker is to be positioned, the
place where the 2 screws of the anti-tilt bracket have to be fitted on
the wall. Please follow the indications given in fig. 7.8.
2. Drill two 8 mm diameter holes in the wall and insert the plastic
plugs supplied.
3. Loosely attach the anti-tilt bracket with the 2 screws supplied.
4. Move the cooker to the wall and adjust the height of the anti-tilt
bracket so that it can engage in the slot on the cooker’s back, as
shown in fig. 7.8.
5. Tighten the screws attaching the anti-tilt bracket.
6. Push the cooker against the wall so that the anti-tilt bracket is fully
inserted in the slot on the cooker’s back.
Attention!
When sliding the cooker into place pay special attention not
to trap the power supply cable in the stability bracket.
EN
Bor
etti Milano / User guide - Installation advice