Boonton 4541, Instruction Manual

Page: 15 / 262

Boonton 4540 Series RF Power Meter
General Information
1-1
1. General Information
This instruction manual provides you with the information you need to install, operate and maintain the
Boonton 4540 Series RF Power Meter. Section 1 is an introduction to the manual and the instrument.
Throughout this manual, the designation ―4540
‖
will be used to mean the 4540 Series RF Power Meter,
which includes both the single-channel Model 4541 and the dual-channel Model 4542.
1.1 Organization
The manual is organized into seven sections and three Appendices, as follows:
Section 1 - General Information
presents summary descriptions of the instrument and its principal
features, accessories and options. Also included are specifications for the instrument.
Section 2 - Installation
provides instructions for unpacking the instrument, setting it up for operation,
connecting power and signal cables, and initial power-up.
Section 3 - Getting Started
describes the controls and indicators and the initialization of operating
parameters. Several practice exercises are provided to familiarize you with essential setup and control
procedures.
Section 4 - Operation
describes the display menus and procedures for operating the instrument locally
from the front panel.
Section 5 - Remote Operation
explains the command set and procedures for operating the instrument
remotely over GPIB bus.
Section 6 - Application Notes
describes automatic measurement procedures and presents an analysis of
measurement accuracy. Definitions are provided for key terms used in this manual and on the screen
displays.
Section 7 - Maintenance
includes procedures for installing software and verifying fault-free operation.
Appendix A - Error Messages
defines the messages that are displayed when errors occur.
Appendix B - Warranty and Repair Policy
states the policies governing the return and replacement of
modules and instruments during and after the warranty period.
Appendix C - End User License Agreements