20
PHENIX green
!
"
"
6
6@
7
8
9
:
4. OPERATION
4.1. DESCRIPTION
A: Cold convection air
B: Hot convection air
V: Outside combustion air intake under the fi replace
V’: Outside combustion air intake at back of fi replace
W: Smoke removal area and accessory secondary
combustion
X: Primary combustion
Y: Main secondary combustion
Z: Smoke
1.
The door: Can go up or down in use,
depending on the need.
2.
The thermostat: Regulates the fl ow of
primary combustion air based on its setting.
The fl ap opens and closes depending on the
temperature in the combustion chamber.
The control button is operated with the
handle provided (cold hand). The fl at end of the
handle is placed in the thermostat notch to rotate
it: from left (0) to right (9) counter-clockwise
(illustration page 14).
3.
Removable stainless steel cold hand. Used to
adjust the thermostat (fl at end) and to lift the
window (round end).
4. Fireplace identifi cation label
5.
Vermiculite or decorative metal: Protective
plate of skamol or painted stainless steel (black)
which acts as an insulator. These plates must be
protected from dampness: a cap must be installed
on the chimney.
6. Baffl
es: Made of refractory stainless steel. They
lengthen the route taken by the smoke to optimise
secondary combustion and increase heat transfer.
They enable adjustment of the fi replace to the
