Blue Box KAPPA V 2001, Operating, Installation And Maintenance Manual And Maintenance Manual And Maintenance Manual

Page: 9 / 70

2
CONTROL AND SAFETY DEVICES CONTROL AND SAFETY DEVICES CONTROL AND SAFETY DEVICES CONTROL AND SAFETY DEVICES CONTROL AND SAFETY DEVICES
- manual-reset high pressure switch
- manual-reset low pressure switch
- safety valve
- mechanical flow switch
- compressor overload cut-out device
T E S T S T E S T S T E S T S T E S T S T E S T S
Units are factory tested and come with oil and refrigerant fluid charges.
OTHER VERSIONS OTHER VERSIONS
OTHER VERSIONS OTHER VERSIONS
OTHER VERSIONS
KAPPA V 2001 /HP: reversible heat pump KAPPA V 2001 /HP: reversible heat pump
KAPPA V 2001 /HP: reversible heat pump KAPPA V 2001 /HP: reversible heat pump KAPPA V 2001 /HP: reversible heat pump
Besides the standard components of the KAPPA V 2001 version, the unit includes:
- Cooling circuit: 4-way diverting valve, suction line separator, liquid accumulator, second thermostatic expansion
valve.
- Electric panel: Microprocessor is configured for summer/winter changeover and automatic defrost, autonomously
controlled for each compressor (except models 41.2 and 46.2).
KAPPA V 2001 /DC: unit with heat recovery condenser KAPPA V 2001 /DC: unit with heat recovery condenser
KAPPA V 2001 /DC: unit with heat recovery condenser KAPPA V 2001 /DC: unit with heat recovery condenser KAPPA V 2001 /DC: unit with heat recovery condenser
Besides the standard components of the KAPPA V 2001 version, for each compressor the unit includes a 100%
heat recovery condenser for hot water production. The recovery water temperature control, the condensing
pressure step control and the safety heat recovery disabling are automatically handled by the microprocessor.
KAPPA V 2001 ST: KAPPA V 2001 ST:
KAPPA V 2001 ST: KAPPA V 2001 ST: KAPPA V 2001 ST: unit with storage tank and water pumps
unit with storage tank and water pumps
unit with storage tank and water pumps unit with storage tank and water pumps unit with storage tank and water pumps (except 16.1-18.1).
(except 16.1-18.1).
(except 16.1-18.1). (except 16.1-18.1). (except 16.1-18.1).
Besides the standard components of the KAPPA V 2001 version, the unit includes:
insulated storage tank, two water pumps, one of which in stand-by, with automatic timed commutation and in
case of failure. Expansion vessel, check valves, gate valves and mechanical flow switch installed.
KAPPA V 2001 /LE: condensing unit KAPPA V 2001 /LE: condensing unit
KAPPA V 2001 /LE: condensing unit KAPPA V 2001 /LE: condensing unit KAPPA V 2001 /LE: condensing unit
The unit is manufactured without evaporator, thermostatic expansion valve and microprocessor control. Liquid
receivers can be supplied on request. Liquid line solenoid valves are supplied as standard equipment.
KAPPA V 2001 /LN: low noise unit KAPPA V 2001 /LN: low noise unit
KAPPA V 2001 /LN: low noise unit KAPPA V 2001 /LN: low noise unit KAPPA V 2001 /LN: low noise unit
Besides the standard components of the KAPPA V 2001 version, the unit includes:
compressors fitted in soundproofed compartment made of painted galvanized sheet with internal insulation,
sound-absorbing mat with inserted lead plate.
ACCESSORIES: ACCESSORIES:
ACCESSORIES: ACCESSORIES:
ACCESSORIES:
- no-frost electric heater on evaporator
- fan speed regulator for operation in low ambient temperatures
- desuperheaters
- external water supply side collectors (mod. 32.2 and 37.2)
- internal water supply side collectors (mod. 50.2 and 55.2)
- rubber or spring vibration dampers
- microprocessor serial interface for supervision or tele-maintenance via personal computer
- additional compressor step control
- continuous compressor step control electronic expansion valve
- tube bundle and compressor compartment protective metal filter mesh
- compressor power factor correction
- remote control terminal
- anti-corrosion treted coils for use in aggressive atmospheres