Blue Box KAPPA V 2001, Operating, Installation And Maintenance Manual And Maintenance Manual And Maintenance Manual

Page: 49 / 70

42
7 . 7 .
7 . 7 .
7 . CALIBRATION OF CONTROL DEVICES CALIBRATION OF CONTROL DEVICES
CALIBRATION OF CONTROL DEVICES CALIBRATION OF CONTROL DEVICES
CALIBRATION OF CONTROL DEVICES
7.1 GENERAL 7.1 GENERAL 7.1 GENERAL 7.1 GENERAL 7.1 GENERAL
All control devices are factory set and tested before delivery. It is however advisable to check the operation of all
devices after a reasonable period of machine operation. The settings are given in Tables IV and V.
ONLY QUALIFIED PERSONNEL MAY WORK ON CONTROL DEVICES. ONLY QUALIFIED PERSONNEL MAY WORK ON CONTROL DEVICES. ONLY QUALIFIED PERSONNEL MAY WORK ON CONTROL DEVICES. ONLY QUALIFIED PERSONNEL MAY WORK ON CONTROL DEVICES. ONLY QUALIFIED PERSONNEL MAY WORK ON CONTROL DEVICES.
Incorrect settings could result in damage and injury.
Incorrect settings could result in damage and injury. Incorrect settings could result in damage and injury. Incorrect settings could result in damage and injury. Incorrect settings could result in damage and injury.
TABLE IV - CONTROL DEVICE SETTINGS TABLE IV - CONTROL DEVICE SETTINGS TABLE IV - CONTROL DEVICE SETTINGS TABLE IV - CONTROL DEVICE SETTINGS TABLE IV - CONTROL DEVICE SETTINGS
TABLE V - SAFETY DEVICE SETTINGS TABLE V - SAFETY DEVICE SETTINGS TABLE V - SAFETY DEVICE SETTINGS TABLE V - SAFETY DEVICE SETTINGS TABLE V - SAFETY DEVICE SETTINGS
* Chiller / Heat pump
CAPACITY STEPS
SET OF CONTROL
SET
POINT
DIFFE-
RENTIAL
SET
POINT
DIFFE-
RENZIALE
SET
POINT
DIFFE-
RENTIAL
SET
POINT
DIFFE-
RENTIAL
Set (summer) °C 11,5 1 10 2 9 3 9 3
Set (winter) °C 40,5 1 42 2 43 3 43 3
1 2 3 4
SET POINT DIFFERENTIAL REMOVED
VALUE
Defrosting °C 4 6 manually
Max pressure bar 26 7.07 manually
Min pressure bar 2.5 / 0.7 * 1 automatically
Antifrost heater evaporator °C 4 6 automatically
Defrosting - start bar 3.03 -- automatically
Defrosting - end bar 18 -- automatically
SAFETY