23
Enter key: press to access fields with modifiable parameters, then to confirm modifications.
“? info” key: press the key to access the pages to change the address of the unit connected to the
terminal.
"Summer" and "Winter" keys: when the unit is set up for both chiller and heat pump
operation, use these keys to switch between these modes.
on/off key: press this key to switch the unit from stand-by to on and vice-versa.
Alarm key: press to silence the alarm buzzer, display (and cancel as necessary) activated alarms.
Arrow keys: press to pass from one page to another or to change settings when in a
modifiable field.
4.9 CONNECTIONS FOR “LE” VERSION (CONDENSING UNIT)
4.9 CONNECTIONS FOR “LE” VERSION (CONDENSING UNIT)
4.9 CONNECTIONS FOR “LE” VERSION (CONDENSING UNIT)
4.9 CONNECTIONS FOR “LE” VERSION (CONDENSING UNIT)
4.9 CONNECTIONS FOR “LE” VERSION (CONDENSING UNIT)
4.9.1 REFRIGERANT CONNECTIONS
4.9.1 REFRIGERANT CONNECTIONS
4.9.1 REFRIGERANT CONNECTIONS
4.9.1 REFRIGERANT CONNECTIONS
4.9.1 REFRIGERANT CONNECTIONS
LE version units (condensing unit) must be connected to the evaporator via refrigerant pipelines.
4.9.2 PIPELINE ROUTES AND MAXIMUM DISTANCE BETWEEN SECTIONS
4.9.2 PIPELINE ROUTES AND MAXIMUM DISTANCE BETWEEN SECTIONS
4.9.2 PIPELINE ROUTES AND MAXIMUM DISTANCE BETWEEN SECTIONS
4.9.2 PIPELINE ROUTES AND MAXIMUM DISTANCE BETWEEN SECTIONS
4.9.2 PIPELINE ROUTES AND MAXIMUM DISTANCE BETWEEN SECTIONS
In “LE” version units with separate sections, the direction of the refrigerant pipelines depends on where the
sections are located and the structure of the building.
Pipelines must however be as short as possible in order to restrict pressure drops and reduce the quantity of
refrigerant in the circuit to a minimum; the maximum permissible pipeline length is 30 metres.
Our Company is at your disposition for any relative information if applications that are not in line with the above
parameters are required.
Summary of Contents for KAPPA V 2001
Page 69: ......
