Blue Box KAPPA V 2001, Operating, Installation And Maintenance Manual And Maintenance Manual And Maintenance Manual

Page: 14 / 70

7
MECHANICAL SAFETY DATA MECHANICAL SAFETY DATA
MECHANICAL SAFETY DATA MECHANICAL SAFETY DATA
MECHANICAL SAFETY DATA
Operating Risk or danger Suggested solution
Unit operating
Maintenance
Stability.
When the unit operates do not exist any risk of
overturning. Follow carefully the instructions of this
manual.
Transport and handling Stability. To avoid overturning, the unit must be lifted using
steel tubes inserted through the lifting holes or
eyebolts located along the sides of the unit marked
by yellow arrows. Follow carefully the instructions of
this manual.
Unit operating
Maintenance Breaking of pipes Pipes are rigidly fixed with brackets to minimize the
vibrations.
Unit operating Sharp edges. Corners and sharp edges have been reduced as
much as possible. Access to unit must be restricted
to suitably qualified persons. Should the unit be
installed in non-protected area, protection grilles
supplied as accessory have to be installed, to avoid
access inside the unit. Removal of grilles is possible
only with special tools.
Maintenance Sharp edges. Inside the unit some sharp edges could be present.
Access to the inside of unit must be restricted to
suitably qualified persons who are familiar with the
potential hazards and precautions necessary for safe
operation and with the necessary protections.
Unit operating Cut The moving parts of unit are limited to protected
zones and the fans are in a not accessible space. A
fan guards according to rule UNI EN 294 protect
fans. Removal of protections is possible only with
special tools.
Maintenance Cut The moving parts of unit are limited to protected
zones and the fans are in a not accessible space. A
fan guards according to rule UNI EN 294 protect
fans.
Unit operating Lacerations and abrasions Access to unit must be restricted to suitably qualified
persons. Should the unit be installed in non-
protected area, protection grilles supplied as
accessory must be fitted to avoid the risk of minor
abrasions and lacerations with the sharp metal edges
of condenser the finned coils.
Maintenance Lacerations and abrasions. Install adequate protections to avoid the risk of
minor abrasions and lacerations with the sharp metal
edges of the finned coils.
Unit operating Injury from rotating The moving parts of unit are limited to protected
zones and the fans are in a not accessible space. A
fan guards according to rule UNI EN 294 protect
fans. Removal of protections is possible only with
special tools.
Maintenance Injury from rotating The moving parts of unit are limited to protected
zones and the fans are in a not accessible space. A
fan guards according to rule UNI EN 294 protect
fans.
Unit operating
Maintenance Release of high-pressure
vapour and liquid. Risk of
explosion All units are fitted with safety valves to avoid risk of
explosion.
Discharge from safety valves has to be conveyed
outside the building through a pipe to avoid damage
due to release of high-pressure vapour and liquid.