Blohm + Voss Oil Tools FloorHand 9GF-1102, Technical Documentation Manual

Page: 51 / 105

51
MAI
N
TE
N
AN
C
E
&
IN
SP
EC
TI
O
N
5. Spinner clamp cylinder pins - Use a grease gun on the grease fitting on each end of the
spinner clamp cylinder.
6. Spinner guide tubes exterior- Brush grease on the spinner guide tubes.
7. Spinner guide tubes - Use a grease gun on the grease fittings.
8. Lifting bracket (2 places) - Use a grease gun on the grease fittings.
9. Stabber (optional; no stabber available when welded frame in use) - Brush grease on the
stabber guide rails and adjusting gear.
10. Stabber (optional) - Use a grease gun on the grease fitting on the bottom of each
stabber locking arm.
11. Spinner clamp cylinder pins - Use a grease gun on the grease fitting on each end of the
spinner clamp cylinder.
12. Die Dove Tail groove - Brush grease in the grooves.