Blohm + Voss Oil Tools FloorHand 9GF-1102, Technical Documentation Manual

Page: 56 / 105

56
MAI
N
TE
N
AN
C
E
&
IN
SP
EC
TI
O
N
the drive roller shaft flush with (or slightly inside) the face of the lower spacer.
14. Slide the entire assembly back into the spinner frame until the drive roller shaft
contacts the back of the slot in the top plate of the spinner frame.
15. Align holes, then lightly tap the drive roller shaft (Item 16) down to engage the lower
end of the drive roller shaft with the bottom plate of the spinner frame. (Items 1 or 2)
16. Orient the flat on the top of the drive roller shaft (Item 16) to properly mate with the
drive roller shaft retainer. (Item 17)
17. Replace the drive roller shaft retainer (Item 17) and, Install the bolts holding it to the
spinner frame and tighten.