Blohm + Voss Oil Tools FloorHand 9GF-1102, Technical Documentation Manual

Page: 35 / 105

35
OP
ER
AT
ION
S
35
OP
ER
AT
ION
S
Figure 34
Figure 35
1. Slowly pull the "Lift” handle to raise
the FloorHand approximately 2 to 3
feet from the rig floor.
Breaking a Connection
2. Ensure the operating area Is clear,
then pull the "Extend” handle to move
the FloorHand out to the pipe. Release
the "Extend” handle when the tool ap-
proaches the pipe center.
WARNING:
NeveR AlloW youRselF oR someoNe else to Be
BetWeeN the FlooRhANd ANd the pIpe, oR ANy
FIXed oBject.
Figure 36
3. Use the "Extend” handle to center
the tool in and out first.
Note:
AlWAys ceNteR By eXteNdING FIRst ANd theN
ceNteR By movING up ANd doWN!
Note:
RememBeR to AlWAys keep youR FRee hANd oN
the GReeN sAFety hANdle.