Blohm + Voss Oil Tools FloorHand 9GF-1102, Technical Documentation Manual

Page: 2 / 105

2
GENERAL INFORMATION
Warnings and Notes
WARNING: A “WARNING”
INDICATES A DEFINITE
RISK OF EQUIPMENT
DAMAGE OR DANGER TO
PERSONNEL. FAILURE TO
OBSERVE AND FOLLOW
PROPER PROCEDURES
COULD RESULT IN SERIOUS
OR FATAL INJURY TO
PERSONNEL, SIGNIFICANT
PROPERTY LOSS, OR
SIGNIFICANT EQUIPMENT
DAMAGE.
NOTE: A “ NOTE ” indicates
that additional information is
provided about the current
topics.
Intended use of this
manual
WARNING: THIS TECHNICAL
DOCUMENTATION CONTAINS
INSTRUCTIONS ON SAFETY,
INSTALLATION, OPERATION
AND MAINTENANCE. IT
MUST BE STUDIED BEFORE
WORKING WITH THE TOOL.
This manual is
intended for use by field
service, engineering,
installation, operation, and
repair personnel. Every
effort has been made to
ensure the accuracy of the
information contained herein.
Blohm + Voss Oil Tools, LLC,
will not be held liable for
errors in this material, or for
consequences arising from
misuse of this material.
Anyone using service
procedures or tools, whether
or not recommended by
Blohm + Voss Oil Tools,
LLC, must be satisfied that
neither personal safety nor
equipment safety will be
jeopardized.
Intellectual property
All rights retained.
No part of this document
may be reproduced in any
form (print, photocopy,
microfilm or any other
procedure) or be processed
using an electronic system
without written approval of
Blohm + Voss Oil Tools, LLC
All information
contained in this manual
is based upon the latest
product information available
at the time of printing.
Dependent on ongoing
technical improvements
(ISO 9001) “Blohm + Voss
Oil Tools, LLC” reserves the
right to change the design
and specifications without
announcement.
The values specified in
this manual represent the
nominal values of a unit
produced in series. Slight
deviations in the case of
the individual devices are
possible.
NOTE: In the event of
problems that cannot be
solved with the aid of this
manual, please contact
one of the addresses listed
below.
General remarks
As with all rig
equipment, the FloorHand
must be operated in
accordance with accepted
rig safety practices and
procedures. All operators
should be familiar with all
safety precautions and
recommended installation
and operating procedures,
including the information
provided in this manual and
any other safety publications
by Blohm + Voss Oil Tools,
LLC Listed on the next page
are safety considerations
and warnings found
throughout this manual:
CE Marking
The tool complies with
the Machinery Directive
2006/42/EC and the
Directive
2014/34/EU
“Equipment and protective
systems in potentially
explosive atmospheres”
The marking is as follows:
CE Ex II 2G T5
Patents
The following patent
numbers apply:
U.S. 11/404,317
U.S. 11/890,582
U.S. 11/732,813
Limited Warranty
The warranty provided will
be void if the FloorHand is
either:
1. Repaired or serviced by
a service facility which
was not authorized by
Blohm + Voss Oil Tools,
LLC.
2. Replacement parts not
manufactured by Blohm
+ Voss Oil Tools, LLC are
used.
3. Modifications were made
to the FloorHand which
were not approved by
Blohm + Voss Oil Tools,
LLC.
Manufacturer & Agents World Wide
Blohm + Voss Oil Tools
Hermann-Blohm-Straße 2
20457 Hamburg, Germany
Phone: +49(0)40/3119-1826/1162
Fax: +49(0)40/3119-8194
oiltools@blohmvoss.com
www.blohmvoss-oiltools.com
Premier Sea & Land Pte. Ltd.
Shaw Centre
1, Scotts Road #19-12
228208 Singapore
Republic of Singapore
Phone: +65-6734-7177
Fax: +65-6734-9115
enquiries@ mtq premier.com.sg
Blohm + Voss Oil Tools, LLC
7670 Woodway, Suite 266 Houston, Texas
77063
United States of America
Phone: +1-713-952-0266
Fax: +1-713-952-2807
BVOT@blohmvoss.com
www.blohmvoss-oiltools.com