Blohm + Voss Oil Tools FloorHand 9GF-1102, Technical Documentation Manual

Page: 33 / 105

33
OP
ER
AT
ION
S
33
OP
ER
AT
ION
S
Figure 29
Figure 30
19. Unclamp the upper wrench by
pulling the upper wrench unclamp
handle.
Note: theRe Is AppRoXImAtely tWo tuRNs oF deAd spAce IN the toRQue AdjustmeNt kNoB.
Note: IF the toRQue Needle FAlls oFF, the cylINdeR Is At the eNd oF Its stRoke. It Is NoW NecessARy to
uNclAmp the uppeR WReNch ANd peRFoRm ANotheR mAke up cycle. (RepeAt toRQue cycle)
Note: toRQue oN All coNNectIoNs should Be held ANd veRIFIed FoR A mINImum oF 3 secoNds.
Note:
RememBeR to AlWAys keep youR FRee hANd oN
the GReeN sAFety hANdle.
18. While holding the torque handle
fully in the makeup direction, slowly
turn the torque adjustment knob clock-
wise until the desired torque (marked
in black on the gauge) is reached.
When torque is reached, hold for 3
seconds; tighten the torque adjustment
lock knob to hold the torque setting.
(DO NOT OVER TIGHTEN)