Blohm + Voss Oil Tools FloorHand 9GF-1102, Technical Documentation Manual

Page: 18 / 105

18
INS
TA
LL
AT
ION
Normal Rig Move Removal and Installation
Lifting
The FloorHand 9GF-1102 and 9FM-2050 combination incorporates two lifting points on the
uppermost area of the torque arm. The unit should always be lifted using a two part bridle,
one leg of each bridle attached to one of the lifting points. Never lift the unit by a single leg.
Figure 3
Warning: Do not liFt
FloorHanD From tHis
location.
Warning: alWays use liFting apparatus (slings,
cables, sHackles anD tHe like) tHat Have been
inspecteD anD are in gooD conDition anD are
properly sizeD. ensure tHat all rigging anD liFting
proceDures are in accorDance WitH accepteD
inDustry practices anD stanDarDs.
Warning: never stanD unDer a loaD being liFteD.
Warning: never alloW personnel to be in tHe
Direction tHat tHe equipment may sWing WHen being
installeD or removeD.