To attach the top handle with URSA Viewfinder
1
Top handle
URSA Viewfinder cap
2
Place your URSA Broadcast on a flat,
stable surface so you can access the
top of your camera.
Remove the URSA Viewfinder cap from the base
of the handle by gently lifting its arm away from
the side of the handle and pulling the cap
from the hole.
3
URSA Viewfinder adapter plate
Thumbscrew for adjusting
the optional URSA
Viewfinder position
2 x 1/4” socket head
screws for mounting
handle to camera
4
Fasten the URSA Viewfinder adapter plate to the
handle using the 4 x M3 screws with a 2.5mm Hex
key driver.
Fasten the handle to any two of URSA Broadcast's
top 1/4” mounting points using the two supplied
1/4” screws with a 3/16” Hex key driver. URSA
Broadcast's rear two mounting points are
recommended for most situations, but you can
choose any pair for better weight balance when
using large lenses. Avoid over tightening the
screws as it may damage the screw threads.
The hole inside the front of the handle is used
with the thumb screw when attaching and
adjusting the URSA viewfinder. For information on
how to attach the URSA Viewfinder to the top
handle, refer to the ‘Blackmagic URSA Viewfinder’
section in your URSA Broadcast manual.
111
URSA Mini Shoulder Mount Kit
