Recording Time Remaining
At the bottom of your URSA Broadcast touchscreen, you’ll see the CFast card indicators.
When a CFast card is inserted, the storage indicator at the bottom of the screen will show how
much recording time is left on the card. The time is shown in minutes and will vary according to
your selected frame rate and codec.
The indicator will automatically recalculate if either of these settings are changed. When there is
approximately 5 minutes remaining on your card, the indicator text will turn red, and will blink
intermittently when there is only 2 minutes remaining. The indicator displays FULL when a card
reaches maximum capacity.
Your URSA Broadcast's storage indicator will display the name of
your CFast card and the record time remaining in minutes
The card name will also be shown in a small bar above the time remaining. This bar will turn
blue to indicate that it is the card that the camera will be recording to. While recording, the bar
will turn red.
Tapping the CFast card indicators will bring up the storage and formatting menu.
Tap the storage indicators on your URSA Broadcast's
LCD touchscreen to access the storage manager
This menu displays the amount of free space on each CFast card currently in your URSA
Broadcast, as well as the card name, length of the last clip, total number of clips per card, and
each card’s file format.
NOTE
You can set your URSA Broadcast to stop recording if dropped frames are
detected to prevent a situation where you waste time shooting unusable footage if you
don't notice the dropped frame indicator. See the 'record settings' section in this
manual for more information.
66
Touchscreen Controls
