16
SERVSELECT
™
Figure 3-4. Cascade connection.
6. Follow steps 4 and 5 in
Section 3.1
for each of your expansion units and your
base unit (if the base unit still has any free channel ports).
7. Follow step 6 in
Section 3.1
for all of your ServSelect units.
8. Power up all of your ServSelect units first, then all attached computers.
Your ServSelect system should be ready for continuous operation.
CAUTION!
Power down all of the ServSelects and all attached computers, and
unplug the ServSelects as well, before you move or service any of the
units.
