30
SERVSELECT
™
4.3.4 C
HANNEL
M
AINTENANCE
From the Command Menu (see the previous section), you can access the Channel
Maintenance Menu (shown in
Figure 4-4
below) if you are operating in nonsecure
mode or if you are the system administrator. Here you can add, delete, or alter
individual channels, as described in the subsections on the following pages.
Figure 4-4. The Channel Maintenance Menu.
4.3.4.A Adding New Channels to a Single ServSelect
To add a new channel (that is, a newly attached computer) to a
single-unit ServSelect
system
, take these steps:
1. Select “Add Channel” from the Channel Maintenance Menu. Type in a new
channel name up to 14 characters long, then press [Enter].
2. Type in the channel letter for the PC you are naming (that is, the letter
designation “A” through “H” of the ServSelect channel port that the PC is
attached to), then press [Enter].
3. When prompted for another cascade level, type “N”, then press [Enter].
Press [Esc] at any point to exit this operation without adding the channel.
Game's
Program Manager
ServSelect Control Panel
Configure Channel
ENTER-accept
ESC-previous
Add Channel
Change Channel Name
Change Channel Address
Dwell Time For ID window
Options For ID window
Alpha Scan Dwell Time
