manualshive.com logo in svg

Black Box DSL LAN Extender 200, User Manual, Page: 32 / 50

Share
Download
Black Box DSL LAN Extender 200 User Manual Download Page 32

                                                                                                                                                   DSL LAN Extender 200 User’s Guide 

 

 © 2002 Black Box Corporation 

Page 26 

The success of the download can also be seen from the result of the TFTP command, showing the 
command executed successfully and actual time it took. If, on the other hand, the TFTP was finished 
with a “timeout occurred” message, and you need to find out why.  

If the LEDs on the unit display a normal pattern (green flashing regularly, yellows flashing as packets 
are forwarded), then either the PC doesn’t have a good Ethernet connection to the box or the IP 
address you entered is incorrect.  

If the green-yellow-yellow LEDs keep circulating, then the download has failed in the middle.  You 
have to reset the box (by powering off and on the box) and see the status of last download.  If the 
problem happened pretty early and the flash ROM has not been touched at all, then the box will boot 
as usual; otherwise, both red and green LEDs will be on steadily, indicating it can’t perform a normal 
boot and is only waiting for a download.  Now, go to step 3 and try again.  

Summary of Contents for DSL LAN Extender 200



















































Reviews:

No comments