manualshive.com logo in svg

Black Box DSL LAN Extender 200, User Manual, Page: 28 / 50

Share
Download
Black Box DSL LAN Extender 200 User Manual Download Page 28

                                                                                                                                                   DSL LAN Extender 200 User’s Guide 

 

 © 2002 Black Box Corporation 

Page 22 

TCP

 

Provides information about the device’s implementation and execution of the Transmission Control 
Protocol (TCP). 

UDP

 

Provides information about the device’s implementation and execution of the User Datagram Protocol 
(UDP). 

SNMP

 

Provides information about the device’s implementation and execution of SNMP. 

Interfaces Supported by DSL LAN Extender Models 

The table below shows the number of interfaces available on the various DSL LAN Extender models. 

Interfaces 

Model 

XDSL 

Line 

Ethernet 

10Base-T 

T1/E1  

RJ-45 

G.703 

Coax 

HS  

RS-422 

LS  

RS-422 

V.35 

M-34 

DSL LAN 
Extender 200 

1 MSDSL 

Yes 

No 

No 

No 

No 

0 

DSL LAN 
Extender 800/850 

2 RADSL 

Yes 

No/Yes 

No 

Yes 

Yes 

0 

Interfaces supported  

HS RS-422: High Speed Serial Interface (DB-9 for DSL LAN Extender 800/850) 

LS RS-422: Low Speed Serial Interface (DB-25) 

M -34: Manchester 34-pin V.35 interface 

Black Box Private MIBs 

Black Box provides two private MIBs for the DSL LAN Extender devices: a Black Box system MIB 
(blackbox.mib) and a Black Box DSL LAN Extender MIB (extender.mib). 

You can find the most current information about the MIBs in the MIB files themselves. Just use a text 
editor to open them and then read the information about the MIBs. Below is some information about the 
main groups of information the MIBs support. 

Products 

This group defines the Black Box product IDs. 

SystemConfigGroup 

This group provides information about product-specific configuration settings. Users can modify most 
variable settings (you can also use the DSL LAN Extender 2.x software to modify these settings). 

SystemStatusGroup 

This group provides system-level information. This information supplements the system information 
available in the system group in the standard MIB. 

Summary of Contents for DSL LAN Extender 200



















































Reviews:

No comments