FlightHawk RF Test Set
56
Bar Graph Controls
Note:
Graph controls are located in the Sensor Operation Menu .
Pause/Resume
When pause is tapped, graph data collection is stopped and the bar is paused.
When resume is tapped, data collection begins and bar begins moving.
Graph Readings
The bar graph initially opens with only one measurement displayed, additional
measurements may be displayed using this menu.
1.
Tap the Sensor Operation Menu .
2.
Tap Graph Readings to display the dialog.
3.
Select as many of the listed measurements as desired.
4.
Click OK after a check mark is displayed for all measurements you wish to
display together on the graph.
Graph Unit
The graph unit of measure may be changed manually by selecting a unit from
the menu.
Note:
Changing the graph unit will automatically change the scale
value.
1.
Tap the Sensor Operation Menu .
2.
Tap Graph Unit to display the dialog.
3.
Tap the radio button for the desired unit of measure.
Graph Scale
The graph scale on the Y-axis may be changed by manually entering the
minimum and maximum scale values.
1.
Tap the Sensor Operation Menu .
2.
Tap Graph Scale to display the dialog.
3.
Tap drop-down list. Select Custom.
4.
Tap the first value entry field (maximum) and enter the maximum scale
value.
5.
Tap the second value entry field (minimum) and enter the minimum scale
value.
6.
Tap the units drop-down list and select the appropriate value.
7.
Click OK.
