BIRD FlightHawk Operation Manual Download Page 27

Page: 27 / 130

FlightHawk-AV Basic Operation

Adjusting the trace within the selected scale

Note:

Scale settings only affect the active trace, if more than one trace

is currently displayed, select the desired trace before changing scale.

Press SCALE icon. See

Figure 7 on page 13

Select one of the following from the menu:

For Manual Operation:
Press Top to change upper limit of the display
Press Bottom to change the lower limit of the display

For Auto Scale:
Press Auto Scale for the system to choose the best fit for the active
trace.

Note:

The scale can also be dynamically changed by pressing and

dragging the trace up or down in the display window.

Figure 7 Adjusting the Trace

Summary of Contents for FlightHawk


































































































































Search results

Summary of Contents for FlightHawk

Reviews:

Related manuals for FlightHawk

Brands by name

Popular brands

BIRD FlightHawk, Operation Manual

Search results

Summary of Contents for FlightHawk

Reviews:

Related manuals for FlightHawk

Brands by name

Popular brands