RF Power Measurement
53
Display Controls Menu
Figure 51 Display Controls Menu
Sensor Configuration Menu
Measurement Type —
Choose the Measurement Type by tapping one of the
available radio buttons in the menu.
Offset —
Offset menu is used to enter the total value of all couplers and
attenuators connected to the sensor (for example, the coupling factor of a
directional coupler).
Tap Offset, enter the total attenuation of couplers and attenuators connected to
the sensor then press OK.
Filter Value —
Set filter value, this filter can be set to either 4.5 kHz, 400 kHz,
or full bandwidth, see Video Filter.
CCDF Limit —
Enter the threshold to be used for CCDF measurement. See
CCDF
Graph Displays
Any measurement can be displayed in graphical or tabular format. Several
different graph types may be displayed.
Tap the Display Controls Menu
to display the graph options.
Graph List —
Default options are Reading Table, New Bar Graph, New Time
Graph, and New Data Set Graph (CCDF and Time Domain modes only). Any saved
graph for the current sensor/mode will also be displayed on the list. See How to
Display a Graph.
Reading Table —
The reading table displays all of the connected unit's
measurements in a tabular
format. The reading table will be displayed until a different option is selected.
