BIRD FlightHawk Operation Manual Download Page 89

Page: 89 / 130

Maintenance

Storage

Store the FlightHawk-AV Analyzer in an enclosed case and in an environment
that does not exceed values listed in the Specifications section.

Ensure that the equipment is stored away from dust, acidic and alkaline

environment, explosive gas, and other causes of corrosion.

Edit Cable List

The Cable List contains a list of known cable values. These procedure provide the
steps necessary to edit the Cable List and select Cable Lists. The Cable List that is
preloaded on the FlightHawk-AV is named CableList.ini.

Edit Cable List on FlightHawk-AV

Add Cable to Cable List

Note:

cables in the default list cannot be changed using this method.

Press DTF icon.

Press CableList option to display the Cable List. See

Figure 65

Figure 65 Cable List Dialog Box

Press Add button to add new cable.

Scroll to the bottom of the Cable List to see the new entry. See

Figure 66 on

page 76

Press each cell for Cable name, Velocity, Cable Loss and Frequency to enter
the new cables information.

Summary of Contents for FlightHawk


































































































































Search results

Summary of Contents for FlightHawk

Reviews:

Related manuals for FlightHawk

Brands by name

Popular brands

BIRD FlightHawk, Operation Manual

Search results

Summary of Contents for FlightHawk

Reviews:

Related manuals for FlightHawk

Brands by name

Popular brands