manualshive.com logo in svg

Binder KBF P 240-UL, Translation Of Original Operation Manual

The Binder KBF P 240-UL is a high-quality climate chamber designed for precise temperature and humidity control. For detailed instructions on how to operate this unit, download the Translation Of Original Operation Manual for free from manualshive.com. Ensure optimal performance with this essential manual.

Share
Download
background image

 

 

 

 

 

 

KBF P + KBF LQC + KBWF (E6) 11/2016 

page 49/189 

 

6.3 

Turning on/off humidity control 

Turning off humidity control is required when operating the chamber without water connection in order to 
avoid humidity alarms. For further information see chap. 18. 

 

Press the 

Setpoint setting

 icon to access the “Setpoint” setting menu from Normal display. 

 

 

“Setpoints” menu. 

Select “Control on/off”. 

 

 

 

 

 

 

  

 

Display with KBF P / KBWF 

 

 

Display with KBF LQC 

You can turn humidity control (humidification and dehumidification) on or off. 

If the “Humidity “checkbox is marked, humidity control is active. Mark / unmark the checkbox to change 
the setting. 

Summary of Contents for KBF P 240-UL






























































































































































































Reviews:

No comments

Related manuals for KBF P 240-UL

Brands by name

Popular brands

Load more brands