Binder KBF P 240-UL, Translation Of Original Operation Manual

Page: 42 / 189

KBF P + KBF LQC + KBWF (E6) 11/2016 page 42/189
5.4 Operating modes
The MB2 program controller operates in the following operating modes:
•
Idle mode
The controller is not functional, i.e., there is no heating or refrigeration and no humidification or dehu-
midification. The fan is off. The chamber approximates ambient values.
The fluorescent tubes are off.
You can activate and deactivate this operating mode with the “Idle mode” control contact in Fixed value
operating mode (chap. 8.4), time program operation (chap. 10.7.3) and week program operation (chap.
11.6.9).
•
Fixed value operating mode
The controller operates as a fixed-point controller, i.e., set-points for temperature and humidity can be
defined, which are then maintained until the next manual change (chap. 8.1).
•
Timer program operation
Stopwatch function: during an entered duration the controller constantly equilibrates to the setpoints
entered in Fixed value operation mode.
•
Time program operation
An entered time program for temperature and humidity is running. The controller offers 25 program
memory places with 100 program sections each. The total number of program sections of all programs
is unlimited
•
Week program operation
An entered week program for temperature and humidity is running. The controller offers 5 program
memory places with 100 switching points each. The switching points can be distributed over all days of
the week.