Binder KBF P 240-UL, Translation Of Original Operation Manual

Page: 76 / 189

KBF P + KBF LQC + KBWF (E6) 11/2016 page 76/189
10.7.9 Tolerance ranges
For temperature and humidity and, with KBF LQC, for the VIS and UVA dose, you can specify a tolerance
range for each program section with different values for the tolerance minimum and maximum. When the
actual value exceeds the given threshold, the program is interrupted. This is indicated on the display (see
below). When the actual temperature is situated again within the entered tolerance limits, the program
automatically continues. Therefore, the duration of the program may be extended due to the programming
of tolerances.
Programming of tolerances may extend program duration.
An entry of “-99999” for the tolerance minimum means “minus infinite” and an entry of “999999” for the
tolerance maximum means “plus infinite”. Entry of these values will never lead to program interruption.
The entry of “0” for the tolerance minimum and/or maximum deactivates the respective tolerance function.
When requesting rapid value transitions, we recommend not programming tolerance values in order to
enable the maximum heating-up, cooling-down, humidification or dehumidification speed.
Tolerance range entry for temperature:
Section view.
Select the field “Tolerance band min” to enter
the lower tolerance band value.
“Tolerance band min” entry menu.
Enter the desired value and press the Confirm
icon.
Setting range: -99999 to 99999
The controller returns to the section view.
Section view.
Select the field “Tolerance band max” to enter
the upper tolerance band value.
“Tolerance band max” entry menu.
Enter the desired value and press the Confirm
icon.
Setting range: -99999 to 99999
The controller returns to the section view.