Binder KBF P 240-UL, Translation Of Original Operation Manual

Page: 149 / 189

KBF P + KBF LQC + KBWF (E6) 11/2016 page 149/189
In case of power failure, transmission of the alarm via zero-voltage relay outputs remains active for the
duration of the power failure. Afterwards, both contacts will close automatically.
When using the communication software APT-COM™ 3 DataControlSystem (option, chap.
21.1) via the Ethernet interface of the chamber for data acquisition, the alarm is not automati-
cally transmitted to the APT-COM™ protocol.

Set the tolerance limits for recording limit value excesses separately in APT-COM™ 3.
21.6 Water protected internal socket (option)
The internal socket is splash proof.
IP system of protection 67 230 V 1N ~ 50-60 Hz
Charge max. 500 W
Maximum permitted operating temperature with this option: 90 °C / 194 °F.
WARNING
Exceeding the permitted maximum temperature.
Electrical hazard.
Danger of death.
Damage to the internal socket.
∅
Do NOT exceed the temperature set-point of 90 °C / 194 °F.

Set the safety controller to 90 °C / 194 °F.

With optional temperature safety device, class 3.3, set the mechanical thermostat class
3.1 to 90 °C / 194 °F.
Heat emission of electrical devices connected inside the chamber may modify the temperature
and humidity range.
CAUTION
Risk of short circuit.
Damage to the chamber.

Use the supplied plug only (IP protection type 67). Plug it in and tighten it by screwing to
secure contact.

If the socket is not used, close the screw lid and turn it to secure.