Binder KBF P 240-UL, Translation Of Original Operation Manual

Page: 51 / 189

KBF P + KBF LQC + KBWF (E6) 11/2016 page 51/189
Integration takes place as soon as operation line “LQC On” is activated, and at least one target dose
value other than 0.0 has been entered. With target dose value 0.0, or in case the entered target dose
value has been reached, the fluorescent tubes do not turn on automatically. The illumination can be
turned on and off with the operation lines “Light VIS” and “Light UVA”.
Every minute the integrated values of UVA and VIS increase by the respective instantaneous value.
The displayed units are Wh/m
2
and MLUXh. The maximum value of the integrated value display is the
respective value reached with the last addition before exceeding 99999. The integration display on the
controller display will then not increase any longer. Recording by APT-COM™ 3 (option, chap. 21.1)
can continue correctly until overflow of the numeral format Floating Point.
In fixed value and program operation mode the illumination equipment automatically turns on when en-
tering a dose target value higher than a dose value already reached. Additionally activating operation
lines “Light VIS” and “Light UVA” can prevent the automatic turning-off when the target dose value has
been reached.
If operation line “Idle mode” is activated, the integrative function is not active. The illumination is off.
Integration continues until operation line “LQC On” is deactivated. The integrated values reached so far
continually remain stored but are not displayed. Integration can be continued any time.
•
Resetting the integrated values
Operation lines “LQC Reset VIS” and “LQC Reset UVA” serve to reset to zero the integrated values
of UVA and VIS once in a time. To do this, the corresponding operation line must be activated for at
least 5 seconds (consider when programming!). The reset is effective once, i.e. for a repeated reset,
first deactivate the operation line (clear the checkbox and confirm) and then activate it again.
•
Operation line “LQC On” not activated
There is no integration. Previously reached integrated values, if any, remain stored but are not dis-
played.
You can turn on the fluorescent tubes with the operation lines “Light VIS” and “Light UVA”.
The symbols VIS and UVA in the screen header indicate that the corresponding fluorescent tubes have
been activated with the operation lines “Light VIS” and “Light UVA”.