Binder KBF P 240-UL Translation Of Original Operation Manual Download

Page: 116 / 189

KBF P + KBF LQC + KBWF (E6) 11/2016

page 116/189

“Date and time” submenu.

In the field “Daylight saving time switch” select
the desired setting “Automatic” or “Inactive”.

“Date and time” submenu.

Select the desired time zone and press the

Confirm

icon.

“Date and time” submenu.

Select the desired start of the daylight saving
time.

“Date and time” submenu.

Select the desired end of the daylight saving
time and press the

Confirm

icon.

There are the following possibilities:

Press the

Confirm

icon to take over the entries and exit the menu.

Press the

Close

icon to exit the menu without taking over the entries.

Summary of Contents for KBF P 240-UL






























































































































































































Search results

Summary of Contents for KBF P 240-UL

Reviews:

Related manuals for KBF P 240-UL

Brands by name

Popular brands

Binder KBF P 240-UL, Translation Of Original Operation Manual

Search results

Summary of Contents for KBF P 240-UL

Reviews:

Related manuals for KBF P 240-UL

Brands by name

Popular brands