Binder KBF P 240-UL, Translation Of Original Operation Manual

Page: 35 / 189

KBF P + KBF LQC + KBWF (E6) 11/2016 page 35/189
To establish the electrical connection of the constant climate chamber with the voltage changer, proceed
in the following order:
1. Connect the power cable of the constant climate chamber to the connection socket (D) of the voltage
changer
2. Establish the power connection of the voltage changer. The socket must provide a protective conduc-
tor.
3. Turn on the voltage changer at the power switch (C) (position “I”). The green pilot lamp (B) lights up.
4. Turn on the constant climate chamber with the main power switch (1) in the lateral control panel
Position “0” = off Position “I” = on
Figure 16: Power switch of the voltage changer
Dimensions of the voltage changer
Height mm 255
Depth (without door handles) mm 360
Depth (incl. cable and door handles) mm 450
Height mm 300
Length of the connection cable to wall socket mm 172
Lateral wall clearance of the constant climate chamber
to set up the voltage changer (minimum)
mm 400
Electrical connection data of the voltage changer
Input side V 115
A 26,9
Output side (to the chamber) V 214
A 13,0
Power frequency Hz 50 / 60