Bilanciai Cigiemme MERCURY PLUS, Instruction Manual

Page: 53 / 260

MERCURY PLUS
1-53
✔
Lift the machine a few centimeters from the footboard by means of a
lift truck or lifter with belts.
ATTENTION
Lift the machine in the central zone, slowly testing the
stability of the load and evaluating the risk of overturning.
Only lift as high as is required to remove the wooden
footboard. Use levers or poles during this operation, so as
to remain as far as possible from the hanging load.
NEVER walk or stand under the load!
✔
Two persons must rapidly remove the wooden footboard.
✔
Lower the machine to the floor.
ATTENTION
If the machine must be moved in any way, it is essential to
place it in its original packing materials, in compliance with
the norms described in the HANDLING chapter.
✔
Position the machine on the level, checking the level gauge on the
scale itself. Use the adjustable feet to level the machine. It is NOT
use the adjustable feet of the scale support to do this.
WARNING
The printing heads of the labelling machines are raised for
transport purposes. Before starting the machine, make
sure that the heads are lowered to the printing position
and that the paper has been installed correctly.