Bilanciai Cigiemme MERCURY PLUS, Instruction Manual

Page: 32 / 260

MERCURY PLUS
1-32
WARNING
Remember that the transformer's primary circuit accepts
three voltage values, i.e. 220 V, 230 V and 240 V. It is
important to connect to the primary circuit with the correct
value otherwise the components on the load side could be
damaged.
Check that:
✔
the voltage and frequency of the electricity main that powers the
terminal correspond to the indications on the warning plate affixed to
the rear and that the power socket to which the terminal is connected
has a grounding pin;
✔
the warning and safety plates are affixed to the casing of the
instrument. failing this, notify your maintenance personnel or contact
our Assistance Service directly.
The terminal complies with the European Directive governing
electromagnetic compatibility, however it is good practice to provide a
separate power supply line for the terminal.
WARNING
To not route the terminal connection cables alongside power
cables as these could cause interference that could prevent
the terminal from operating in the correct way. Only use the
connection cable supplied with the terminal. If the cable
supplied is too short, do not attach an extension lead but
contact the Manufacturer.