Bilanciai Cigiemme MERCURY PLUS, Instruction Manual

Page: 166 / 260

MERCURY PLUS
1-166
5.17.2 Error messages
The error messages in the following list appear owing to incorrect entries
made by the user. Note that it is incorrect to proceed with the process
after one of these messages has appeared.
If Mercury is switched on without the trace.cfg in
ARCHIVES\USER\TRACE, the following message will appear in the
boot phase, before the application starts:
ERROR CLASS: 100; TYPE OF ERROR: 106
No Trace. config. file
If the trace.cfg is present but the archive is empty and the operator
attempts to access the process, a warning window will appear with the
message:
TRACEABILITY LOT NOT FOUND
If OK is pressed, the machine accesses the process. The piece is
weighed, but the message "Field Not Valid:" "Variable field ID" is printed
on a level with the traceability fields in the label. The process fields are
printed normally.
The following message will appear in the boot phase, before the
application starts if ";", "," are omitted or if excess data are entered (e.g.
an extra 0) in the table:
ERROR CLASS: 7000; TYPE OF ERROR: 7006
Index Out of String
The following message appears in the absence of the tabpaesi.txt file (or
any file that identifies the table with another name), or if reference is
made to it in trace.cfg with the wrong name and the relative table is
recalled with F7:
Error 108:
No table file