USER MANUAL 1.10 | DC1000 DIALOG-CONTROLLER
Berghof Automation GmbH | Harretstrasse 1 | 72800 Eningen | www.berghof.com
2VF100108FE04.docx | DC1000_HB_en_2D0982010ZD00.docx
59
NOTICE
CP1131-P FORCE mode:
FORCE indicates that the application program is running and CODESYS forc-
es a value to be written to at least one variable at the start of every cycle. This
makes it evident to the user that the application program might react differently
if no such forced access to the PLC program’s process were to occur.
Status LEDs for CPC++ programs
LEDs 3 to 5 can each be separately controlled by application software.
Ethernet status LED
Refer to the section “10/100 Base T Network Connection (Ethernet)”.
3.3. Service menu
Functional scope
The Dialog-Controller’s service menu allows the user to define and examine device and communications pa-
rameters as well as device states. It also represents a valuable service and commissioning aid. The service
menu thus permits setting definition at the Ethernet interface and diagnostics functions in case of errors to
be simplified and accelerated.
The service menu has a two-part structure:
Parameter window
The following four menu items are displayed here. Each menu item can contain additional subject-related
submenu items.
Config
PLC
Info
Display
PLC window
Up to two lines reflecting the current PLC status can be displayed. Line 1 will always be visible, while line 2
will only appear when an error occurs.
2VF100273DG01.cdr
PLC window
Parameter window
Basic structure
