BERGHOF DC1000 User Manual Download Page 18

Page: 18 / 142

USER MANUAL 1.10 | DC1000 DIALOG-CONTROLLER

Berghof Automation GmbH | Harretstrasse 1 | 72800 Eningen | www.berghof.com

DC1000_HB_en_2D0982010ZD00.docx | 2VF100107FE10.docx

Expansion slots

The device is equipped with three expansion slots for expansion cards (e.g., I/O cards) with the associated
SPI interface. Alternately, one of the slots can be used for an “Anybus

” embedded bus module (e.g., Profibus

DP) manufactured by HMS.

Real-time clock

A software interface can be used to set or reset a real-time clock equipped with a backup battery.

SD card reader

Data can be written to or read from memory cards using the conventional MMC/SD card interfaces.

NOTICE

If the SD card reader is activated, then the second RS232 interface (X5) is not

longer available.

Performance feature overview



Freescale POWERPC

CPU 266 (400) MHz



Application program and data memory (RAM): 64 (128) MB onboard / 32 (96) MB for the application



Application program memory (Flash): 16 (32) MB onboard / 8 (24) MB for the application



Retain memory 16 KB



1 Ethernet 10/100 port



1 (3) USB host ports



1 (2) CAN ports



1 RS232 serial port for programming tools and applications



1 (2) serial data ports RS232 / RS485



I/O level locally expandable via an internal E-bus for up to seven subscribers (digital / analog)



Up to 3 onboard expansion slots for I/Os and a bus module



Real-time clock



MMC/SD card slot

The scope of supply of the controller module consists of:



Dialog-Controller DC10xx
incl. 2-pin plug-in connector for power supply



Scope of supply

Summary of Contents for DC1000















































































































































Search results

Summary of Contents for DC1000

Reviews:

Brands by name

Popular brands

BERGHOF DC1000, User Manual

Search results

Summary of Contents for DC1000

Reviews:

Brands by name

Popular brands