Universal Optical Drill Grinder
Operator's Manual Issue 06/01 Rev 02
8
Startup
Startup
When it is delivered, the machine contains several transportation adjustments. Before starting up, perform the
following basic adjustment.
Basic adjustment for right-hand
drills
Point Angle
-
Loosen clamping lever 14
-
Turn swivel arm 18 and adjust point angle
scale A to 118º
-
Tighten clamping lever 14
Secondary Relief Angle
-
Loosen locknut 20
-
Slightly raise swivel arm 10
-
Loosen locknut 20
-
With screw 20 adjust secondary clearance angle
scale B1 to 30º
-
Tighten locknut 20
Primary Relief Angle
-
Loosen locknut 21
-
Lift swivel arm 10
-
Set primary angle scale „B“ with screw 21 to
the value of 6º
-
Tighten locknut 21
Point Splitting Device
Adjust the scales for the point-splitting device as
follows:
C = 7
E = 6
D = 40
G = 5 R
Completing and using the setup sheet
In order to record the best adjustments for your applications, use one of the enclosed adjustment sheets.
Enter the adjustment values for repeated applications. This will save you a lot of work later.
The adjustment values include:
A: Point angle
C, D, E, G: Angles on point-splitting device
B1: Secondary clearance angle
B2: Primary cutting angle
