Universal Optical Drill Grinder
Operator's Manual Issue 06/01 Rev 02
23
Handling grinding wheels
Mounting Diamond and CBN grinding wheels
This section describs How to change CBN or Diamond wheels.
Handling grinding wheels
Only perform work with machine at
standstill
-
Turn dust cover counter clockwise and remove
(bayonet mount)
-
Hold knurled nut at rear of motor shaft
-
Slacken screw in centre of grinding wheel by 1/2
turn using Allen wrench
-
Remove grinding wheel
-
Mount new grinding wheel
-
Mount dust cover as follows:
-
Insert dust cover into bayonet mount
-
Tighten clockwise
-
Swing stop lever down
-
Grap wheel inside
-
Pull wheel forward to the stop
-
Tighten locking screw in center of wheel
Do not dress Diamond and CBN
wheels
To prevent confusion, zhe wheels are marked with
different colors.
CBN :
green
use ionly for high speed steel tools
diamond : blue
use unly for carbide tools
