Universal Optical Drill Grinder
Operator's Manual Issue 06/01 Rev 02
6
Dust extraction
The MEGA-POINT can be connected to a central dust
extraction system.
Connection: 38 mm dia.
Dust collector
However, the machine is also prepared for connection
to a standard industrial vacuum cleaner. A vacuum
cleaner can be connected to the machine as follows:
-
Connect vacuum cleaner power cord to socket at
machine rear.
-
Connect cable according to electrical diagram on
page 38.
The vacuum cleaner is now connected in such a way
that it starts together with the grinding motor.
Delivery, transportation and installation
Machine lamp (optional)
-
Attach the 6V/10W machine lamp, article number
976 009 (optional), to the right side of the machine
using the supplied holder.
-
Insert the cable into the housing through the desig-
nated opening and seal with a gland.
-
Connect cable according to electrical diagram on
page 38.
Preparing tools
Unpack and clean the supplied tools.
All tools must be dried before use. Grinding dust
sticks to wet, oily tools and can damage them.
