Universal Optical Drill Grinder
Operator's Manual Issue 06/01 Rev 02
7
Component discription
Component discription
The illustrations below and their legends are intended as a reference guide. In this operator’s manual, all the
components are labelled in accordance with these legends. If you have any queries, please refer to this
section.
1 Master switch
2 Motor switch
3 Connection for vacuum cleaner
4 Protective hood (hood and slide)
5 Stop
6 Trueing Diamond
7 Grinding Wheel, Motor
8 Index Pin
9 Sapphire lens
10 Swivel arm MP 20 or MP 30
11 Feed ring
12 Tension nut
13 Scale ring for point angle
14 Blocking lever for point angle
15 Vertical scale
16 Horizontal scale
17 Clamping Levers
18 Swing Arm
19 Scale ring for primary cutting angle and
secondary clearance angle
20 Stop screw and locknut for secondary
clearance angle
21 Stop screws with locknut for primary cutting angle
22 Point-splitting attachement
23 Flexible shaft
24 Viewing screen
25 Dresser lever
26 Machine lamp
