Universal Optical Drill Grinder
Operator's Manual Issue 06/01 Rev 02
11
Operating the machine
Install collets
Collets MP 6.5 (1.0 to 6.5 mm dia.)
Collets MP 20 (6.0 - 20.0 mm dia.)
-
Remove knurled handle 1
-
Remove pressure tube 2
-
Select desired collet dia.
-
Insert collet 3 into holder
-
Insert pressure tube 2
-
Screw knurled handle 1 on
Swivel arm MP 30 (option) and
collets MP 30 (20.0 - 30.0 mm dia.)
-
Use 6x lens if necessary
-
See section on
Changing lens
on page 25/26
-
Slacken screw 1
-
Remove swivel arm MP 20
-
Mount swivel arm MP 30
-
Tighten screw 1
-
Slacken tension nut 2
-
Remove tension nut and pressure tube
-
Select required collet dia.
-
Insert collet 3
-
Mount tension nut and pressure tube
