Universal Optical Drill Grinder
Operator's Manual Issue 06/01 Rev 02
31
Troubleshooting
Troubleshooting
General faults
Fault
Reason
Resolution
Chapter, Page
Lamp not switched on
Press main switch
Switching machine on -
main switch, page 9
No image on viewing
screen
Machine not connected
to power
Insert power plug
Connect, page 6
Defective lamp
Replace bulb
Replacing projection
lamp, page 27
Defective fuse for
projection lamp
Replace fuse for
projection lamp
Replacing fuse for
projection lamp, p. 28
Drill has no contect with
sapphire lens
Adjust drill propperely
Alining drill, page 12/13
Image unfocused
Lens wrong adjusted
Focus lens
Fucusing lens,
page 25/26
Motor not switched on
Press motor switch
Switch motor on,
page 14
Motor does nor turn
Main switch not on
Press main switch
Switching machine on -
main switch, page 9
Defective main fuse
Replace main fuse
Replacing main fuse,
page 28
Machine not connected
to power
Insert power plug
Connect, page 6
Defective motor
Contact customer
service dep.
Swivel arm in front of
sappire lens
Move swivel arm to the
right
Point splitting,
page 17
Splitpoint grinding
wheel does not turn
Motor not switched on
Press motor switch
Switch motor on,
page 14
Flexible shaft not
connected
connect flexible shaft
Connect flexible shaft,
page 5
Defective main fuse
Replace main fuse
Replacing main fuse,
page 28
