Continuous Rating (W)
Voltage (V)
Cycle (Hz)
Input
Output
Max. Output(W)
120
220
230
240
12.0
6.7
6.4
6.1
50 / 60
50 / 60
50 / 60
50 / 60
1,400
1,400
1,400
1,400
9,000 for USA, Brazil,
Switzerland
4,000 - 9,000 for USA, Brazil,
Switzerland
4,000 - 10,000
840
840
840
840
1,800
2,100
2,100
2,100
Model No.
Description
PRODUCT
Current (A)
T
ECHNICAL INFORMATION
C
ONCEPT AND MAIN APPLICATIONS
S
pecification
S
tandard equipment
O
ptional accessories
< Note > The standard equipment for the tool shown may differ from country to country.
P 1 / 10
9566C / 9566CV
150mm (6" ) Angle grinders
Model 9566C and 9566CV are 150mm (6" ) version
of 1,400W class models 9565C and 9565CV.
The features of 9566C
* Equipped with electronic for soft start,
current limiter and speed control
*"Super Joint System-SJS".
The features of 9566CV
* Pre-setting dial for speed control is added
to the 9566C's features.
Dimensions : mm ( " )
Width ( W )
Height ( H )
Length ( L )
299 ( 11-3/4 )
169 ( 6-5/8 )
103 ( 4-1/16 )
W
L
H
Model No.
Electronic
No load speed : min.
-1 =
rpm
.
Diameter
Thickness
Hole diameter
Current limiter
Soft starter
Constant speed
Pre-setting dial for speed control
Wheel size
: mm ( " )
Safety clutch
Cord length : m ( ft )
* Net weight : kg ( lbs )
* Net weight : without wheel and grip
9566C
9566CV
150 ( 6 )
22.23 (7/8 )
6 (1/4)
10,000
Yes (SJS system)
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
2.5 (8.2)
2.4 (5.3)
* Lock nut wrench ......................................... 1 pc.
* Depressed center wheel 150 - 36 ................. 1 pc.
* Grip 36 ......................................................... 1 pc.
* Depressed center wheel 150 - 24
* Depressed center wheel 150 - 36
* Abrasive disc 150 - 24
* Abrasive disc 150 - 30
* Abrasive disc 150 - 50
* Abrasive disc 150 - 80
* Abrasive disc 150 - 120
* Rubber pad
* Lock nut 16 - 48
* Wire cup brush 90
* Super flange 47 (only for DIN type spindle thread)
* Diamond wheel 150
* Head cover