94
Universal Wireless Device System
VectorBRIDGE
n
n
Replacing the Battery
The ARC10 Wireless Key requires one lithium
CR2032
battery. To replace the battery, open the
key’s plastic housing by inserting a flathead
screwdriver along the side of the unit and care-
fully twist the screwdriver to separate the top and
bottom plastic. Once separated the battery will be
visible, simply remove the old battery and insert
the new one.
+
+
The polarity of the battery must be ob-
served, as shown in the Figure 2. Im-
proper use of Lithium batteries may cause
heat excursion, explosion or fire, which
may cause physical harm.
+
+
Do not recharge empty batteries. Replace
old batteries with the same or similar type,
as per the manufacture’s instructions.
+
+
Batteries must be disposed properly.
Fig. 2
- Battery position
Summary of Contents for VectorBRIDGE
Page 95: ......