Bentel Security VectorBRIDGE, Installation Manual, Page: 63 / 96

63
E
n
g
li
s
h
n n
Enroll Wireless Keys
1 Press the PROG ( 1 ) button on the Interface for at least
5 seconds.
Select. Select. _ _ Option Option __ __
Supervis. Supervis. _ _ Zone Zone __ __
2 Press either
9 9
or
0 0
to scroll for the Enroll Keyfobs
option, then press
E E
to continue or press
e e
to exit
programming.
Select. Select. _ _ Option Option __ __
Enroll Enroll _ _ Keyfobs Keyfobs __ __
3 Press either
9 9
or
0 0
to scroll for the Keyfob number then
press
E E
to continue or press
e e
to go back to step 2.
Select Select _ _ Keyfob Keyfob ___ ___
Keyfob Keyfob _ _ 1 1 ________ ________
4 Enter the ESN of the Wireless key: 6 digits must be
entered. If the Wireless key has a 5 digit ESN enter 0
before entering the ESN (e.g. ESN 61234,enter
061234). Wrong digits can be corrected by using
A A
or
B B
to scroll the ESN, and by entering the correct
digit in the blinking space.
ESN ESN _ _ Keyfob Keyfob _ _ 1 1 ____ ____
ØØØØØØ ØØØØØØ __________ __________
5 Press
E E
to enroll the ESN shown on the display or
press
e e
to go back to step 3.
ESN ESN _ _ Keyfob Keyfob _ _ 1 1 ____ ____
259ØØ4 259ØØ4 __________ __________
6 Record the serial number, and the assigned Keyfob number in Table A4 in the
Programming Sheets section.
7 Repeat steps 3 to 6 until all the Wireless keys have been enrolled, then press
e e
to go back to step 2.
INSTALLING VECTORBRIDGE